Catalogue values for Tricycle Or Rickshaw
| Category | Specification | Bid Requirement (Allowed Values) |
|---|---|---|
| Generic Parameters | Driving Mechanism | Pedestal Chain |
| Length of Tricycle (mm) | 1800.0 | |
| Length of Cart (mm) | 1500 | |
| Width of Cart (mm) | 1000 | |
| Height of Cart (mm) | 300 | |
| Number of Plastic Containers with lid and handle (Nos) | 8 | |
| Capacity of the each Container (Litres) | 80.0 | |
| Material of the Container and Lid | Virgin HDPE | |
| Constructional Parameters | Frame Structure | Made of MS Tubes |
| Diameter of MS Tube (mm) | 28.6 | |
| Thickness of MS Tube (mm) | 1.63 | |
| Cart Frame Material | MS Angle of size 35 x 35 x 5 mm | |
| Material of Bottom Plate of Cart | Mild steel plate | |
| Thickness of Bottom Plate of Cart (mm) | 4.0 | |
| Stiffener Material | M S Angle of size 25 x 25 x 3 mm | |
| Type of Front Wheel | Tyre Tube Wheel | |
| Diameter of Spike of Front Wheel (mm) | 12.0 | |
| Number of Rear Wheels (Nos) | 2 | |
| Type of Rear Wheels | Tyre Tube of size 2.50x 16 | |
| Rear Rim Diameter (mm) | 12.0 | |
| Rear Rim Width (mm) | 10.0 | |
| Thickness of Spike of Rear Wheel (mm) | 3.0 | |
| Minimum Wall thickness of the Plastic Container and Lid (mm) | 4.0 | |
| Maximum Ash content of the container and Lid when tested | 1 | |
| Pretreatment | Two coats of red oxide after phsphating before painting | |
| Paint | Ennameled Paint | |
© 2025 GeM All rights reserved
Site operated and maintained by Managed Service Provider
New on GeM
