menu
GeM Logo, Government of India
gem gem
GeM Logo, Government of India
categories

Catalogue values for Spectrum Analyzers and Vector Network Analyzers

Category Specification Bid Requirement (Allowed Values)
FEATURES Description of the itemuu Spectrum analyzers
GENERAL FEATURES COMMON TO SPECTRUM AND VECTOR ANALYSER Markers Normal, delta, 12 markers
Trigger Free run, video, External
Display Internal TFT/LCD Color Display with provision for six traces
Interface USB, LAN
Software for transfer of screen shot/measurement data to PC Yes
SPECTRUM ANALYZER FEATURES Frequency Range 10 Hz to 26.5 GHz
Aging rate of spectrum analyzer frequency: Better than 1x10-6 /Year Yes
Frequency counter Resolution(minimum) (Hz) 0.001Hz
Frequency Span 10 Hz to 26.5 GHz
Spectral purity:SSB Phase Noise @10KHz offset shall be less than -90dBc/Hz at 1GHz SSB Phase Noise @ 10KHz offset , at 1GHz shall be less than -100dBc/Hz
Spectral purity:Harmonics @ -40dBm level <=60 dBc yes
Sweep time @span >or= 1 KHz 1 mS to 4000 S
Sweep time @span = 0 Hz 1microS - 1000sec
Resolution Bandwidth (-3dB) 1Hz to 10MHz in steps
Video Bandwidth 1Hz to 10MHz in steps.
Amplitude : Max input level for protection (dBm) +30
Amplitude : Max input level for measurement (dBm) 20
Amplitude :level measurement uncertainity (dB) <=1, <=±1
Average noise level displayed(@300HzRBW,10Hz VBW) <=-140dBm for 10MHz to 3 GHz
Average noise level displayed(@100HzRBW,1Hz VBW) <= -140dBm for 13GHz to 26 GHz, <= -140dBm For 3GHz to 13GHz
Average noise level displayed(@300HzRBW,1Hz VBW) <=-110dBm for 10MHz to 3 GHz, <= -125dBm for 3GHz to 13 GHz
Measurement features C/N ratio,AM%,time domain power measurement,channel power measurement,Phase noise measurement,TOI(THIRD ORDER INTERCEPT),OBW(occupied bandwidth)
VECTOR NETWORK ANALYZER FEATURES Cable Loss (dB) NA
Calibration with Precision calibration components-open, short, load should be included to achieve directivity >35 dB hint: NA for items designated as spectrum analyzers NA
RF output port NA
Nominal port power output: Hi Power/Lo-Power selectable NA
OPERATING CONDITIONS Operating Temperature 0 to 50 degree C & 80% RH @ 40 degree C
Operating Humidity 90% @ 40deg. C
POWER REQUIREMENT Power requirement 230 +- 10 VAC, 50Hz
WARRANTY Warranty 3, 4, 5 Or higher
CERTIFICATION/TEST REPORT DETAILS The equipment supplied with calibration certificate yes
conformity to Dry Heat for 16 hrs at a specified maximum temp in accordance with IS:9000/part-3/section-5/1977 latest no
conformity to Cold Test for 4 hrs at a specified minimum temp in accordance with IS:9000/part-2/section-4/1977 latest no
conformity to Damp Heat (Cyclic)Test for 2 Cycles of 24 h each at a temp of 40 degree C & 95% RH no
Availability of Test Reports from Central Govt/NABL/ILAC approved accredited lab to prove conformity to the specification Yes