Catalogue values for High Mast Lighting Tower for large area with LED Flood Lighting System
| Category | Specification | Bid Requirement (Allowed Values) |
|---|---|---|
| GENERIC | Height of High Mast Tower (in Meters) | 16 |
| Installation and commissioning (Installation and commissioning work at multiple locations shall follow as per the guidelines of State/Central Govt rules and regulations as applicable) | Yes. Including Civil work at site, No | |
| Onsite warranty (in Years) | 2 | |
| High mast System | No of sections | 2 |
| Effective length of each section (in m) | 8.5 | |
| Material construction: The mast shall be manufactured using special steel plates, conforming to | 355 gradeasper BSEN10 025 | |
| Bottom diameter (in mm) - Minimum | 540 | |
| Plate thickness for Middle (in mm) - Minimum | 4 | |
| Plate thickness for Bottom (in mm) - Minimum | 5 | |
| No of longitudinal welds / section (in Nos) | 1, 2 | |
| Diameter of base plate (in mm) - Minimum | 740 | |
| Thickness of base plate (in mm) - Minimum | 25 | |
| Wind Load | Maximum Wind load | 47 m/sec, 50 m/sec |
| Door Opening | Size of opening and closing door at base compartment of high mast (in mm) - Minimum | 1200 x 250 |
| Junction Box | Ingress protection for Junction Box i.e. IP Class (as per IS/IEC:60529:2001 latest) Test Report from Central Government lab/NABL/ILAC accrediated lab and report shall furnish to buyer on demand | IP 65 |
| No of core | 3, 5 | |
| Cable category | FR-LSH, 1 | |
| Size of cable (in Sq mm) | 2.5 | |
| Conductor material shall be | Copper | |
| Winch | The winch shall have provision for manual operation in case of failure of the motor | Yes |
| Stainless Steel Wire Rope | The breaking load of each rope shall be at full load as per the relevant standard | >/=2400 Kg, >/=2250Kg |
| Electrical System, Cable and Cable Connections | No. of cores | 3, 5 |
| Cable shall be | Armoured, Unarmoured | |
| Conudctor material shall be | Copper, Aluminium | |
| Cable Category | 1 | |
| Incoming power cable from feeder panel to base compartment of mast and cable shall conforming to | IS:7098 (Part 1):1988 latest | |
| Feeder pillar Panel | Feeder pillar panel for each mast | Yes |
| Feeder panel shall be suitable for | 415 V, 3 phase, 4 wire, 50 Hz, AC | |
| The control panels shall be | Stand mounted | |
| Ingress protection for feeder pillar panel i.e IP Class (as per IS/IEC:60529:2001 latest).Test Report shall furnish from Central Government lab/NABL/ILAC accrediated lab to buyer on demand | IP 65 | |
| It shall be fabricated out of | 14 SWG CRCA sheet steel | |
| Thickness of sheet (in mm) | 2 | |
| The panels shall be given pre-treatment and powder coated and color shall be | Grey | |
| The stand shall be painted in | Black color | |
| Cable entry shall be at the | Bottom | |
| The panels shall have | knock outs of the required cable | |
| Laminated circuit diagram shall be pasted | inside of the door | |
| Feeder pillar shall have pad locking arrangement | Yes | |
| Earth terminal | 12 mm dia. Bolts | |
| Panel shall have a sloping cover to avoid accumulation of dust | Yes | |
| Panel shall be provided with incoming & outgoing MCCB / MCB of appropriate rating and in desired quantity depending on total no of circuits in use | yes | |
| Timer for automatic ON & OFF of lights with pilot lamps shall be provided | Yes | |
| Bus bars material | Yes. Copper | |
| No of Cores | 3, 5 | |
| Size of cable (in Sq.mm) | 2.5 | |
| Cable Shall be | Armoured, Unarmoured | |
| The conductor material shall be | Copper | |
| cable category | 1 | |
| LED FLOOD LIGHT LUMINAIRE | No. of Luminaires for each high mast lighting tower (in Nos) | 8 |
| LED Rating/System Wattage/Rated Power for each luminaire | 200W | |
| Luminaire System Efficacy (Lumen/watt) | >/= 100 Lm/Watt | |
| Ingress Protection (IP Rating) as per IS:10322 (Part 1):1982 latest | IP65, IP66 | |
| Mounting brackets (included) | Adjustable | |
| Input operating Voltage range and frequency | 90 to 300 Volts AC at 50Hz+/-2Hz | |
| Rated voltage | 230 V AC 50 Hz | |
| Colour temperature | 6000K (+/- 500K) | |
| Optic lense material (UV stabilised) (Write NA for without optic lense supply) | Poly carbonate lense | |
| Operating temperature range | -20 deg C to +50 deg C, -10 deg C to +50 deg C | |
| The luminaire shall be protected against surges and transients( Internal) | >/=5KV | |
| The luminaire shall be protected against surges and transients of >/=10KV (External) | Yes | |
| Extruded silicon loop gasket shall be provided in the lantern body to ensure a weather proof seal between the UV Glass cover and the metal housing to exclude the entry of the dust,water,insects etc | Yes | |
| Number of electronic control gear per luminaire (power supplies) | 1 No. | |
| Length of ISI marked three core wire (shall be provided along with supply of material) | 50 cm | |
© 2025 GeM All rights reserved
Site operated and maintained by Managed Service Provider
New on GeM
