Catalogue values for High Vacuum Pump
| Category | Specification | Bid Requirement (Allowed Values) |
|---|---|---|
| General Scope and Application | Item name | High Vacuum Pump |
| Design and Construction | Type of Pump | Direct drive type of two stage oil sealed rotary vane fitted |
| Number of Stages | Two | |
| Gas Ballast | Fitted with gas ballast | |
| Inlet Dust Filter | Fitted with dust Filter | |
| In-built Anti-suck back | Yes, NA | |
| Type of Guage to check the ultimate vacuum | Digital Pirani Gauge with single gauge head and sensor | |
| Technical Parameters | Displacement/ Nominal pumping speed (m3/hr) | 6 - 35 |
| Ultimate Vacuum without Gas blast (mbar) | 1x10-4 mbar or more | |
| Ultimate Vacuum with Gas blast (mbar) | 1x10-3 mbar or more | |
| Pump Rotational Speed at no load (in RPM) | 1300 - 1800 | |
| Motor power (in HP) | 0.5, 0.6, 0.7, 0.8, 0.9, 1.0 | |
| Motor Type | Phase (Single), IE-2 standard or equivalent | |
| Suction Connections type | KF Tee - Unequal, 2 KF25 end flanges and KF10 end flange | |
| Power Supply | Single Phase AC (220 +/- 10 volts 50 +/- 1 Hz) | |
| Other Requirement | Spares for Operation to be supplied with product | At least Two years Spares for operation: One set of spring & spring pin, one set of oil seals, gasket, O-Ring etc. |
© 2025 GeM All rights reserved
Site operated and maintained by Managed Service Provider
New on GeM
