Catalogue values for Tricycle Or Rickshaw
| Category | Specification | Bid Requirement (Allowed Values) |
|---|---|---|
| Generic Parameters | Driving Mechanism | Pedestal Chain |
| Length of Tricycle (mm) | Any applicable numeric value | |
| Length of Cart (mm) | 1500, 1350 | |
| Width of Cart (mm) | 1000, 800 | |
| Height of Cart (mm) | 300, 457 | |
| Number of Plastic Containers with lid and handle (Nos) | 6, 8 | |
| Capacity of the each Container (Litres) | 40.0 | |
| Material of the Container and Lid | Virgin Polypropylene | |
| Constructional Parameters | Frame Structure | Made of MS Tubes |
| Diameter of MS Tube (mm) | Any applicable numeric value | |
| Thickness of MS Tube (mm) | Any applicable numeric value | |
| Cart Frame Material | MS Angle of size 25 x 25 x 3 mm, MS Angle of size 35 x 35 x 5 mm | |
| Material of Bottom Plate of Cart | Mild steel plate | |
| Thickness of Bottom Plate of Cart (mm) | Any applicable numeric value | |
| Holes in Bottom Plate of Cart | Having 12 mm diameter holes at a distance of 200 mm square Matrix | |
| Lengthwise Number of Stiffeners below the Plateform to support the MS Plate (Nos) | 3 | |
| Widthwise Number of Stiffeners below the Plateform to support the MS Plate (Nos) | 1 | |
| Stiffener Material | M S Angle of size 25 x 25 x 3 mm, MS Angle of size 35 x 35 x 5 mm, GI Angle of size 40 x 40 x 4.5 mm, GI Angle of size 40 x 40 x 5 mm | |
| Finish of Handle | Nickel and Chrome Plated | |
| Finish of Chain Wheel | Nickel and Chrome Plated | |
| Finish of Crank | Nickel and Chrome Plated | |
| Front Rim Thickness (mm) | 3.0 | |
| Number of Front Wheel (Nos) | 1 | |
| Type of Front Wheel | Puncherless Rubberised Wheel, Tyre Tube Wheel | |
| Front Rim Diameter (mm) | 300.0, 700.0 | |
| Front Rim Width (mm) | 38.0 | |
| Number of Spikes in Rear Wheel (Nos) | 12, 16 | |
| Diameter of Spike of Front Wheel (mm) | Any applicable numeric value | |
| Number of Rear Wheels (Nos) | 2 | |
| Type of Rear Wheels | Puncherless Rubberised Wheel, Tyre Tube of size 2.50x 16 | |
| Rear Rim Diameter (mm) | Any applicable numeric value | |
| Rear Rim Width (mm) | Any applicable numeric value | |
| Rear Rim Thickness (mm) | 3.2 | |
| Number of Spikes in Front Wheel (Nos) | 32, 48 | |
| Thickness of Spike of Rear Wheel (mm) | Any applicable numeric value | |
| Daimeter/ Width of Spike in Rear Wheel (mm) | 12.0, 3.2 | |
| Minimum Wall thickness of the Plastic Container and Lid (mm) | Any applicable numeric value | |
| Maximum Ash content of the container and Lid when tested | 1 | |
| Pretreatment | Two coats of red oxide after phsphating before painting | |
| Paint | Ennameled Paint | |
| Manufacturer 's Name Marked on the Tricycle | Yes | |
| Year of Manufacturing Marked on the Tricycle | Yes | |
| Finish of Rim | Nickel and Chrome Plated | |
| Accessories Parameters | Bell | Yes |
| Two Reflectors at back | Yes | |
| Type of Reflector | Adhesive Tape | |
| Lock for locking the Tricycle | Yes | |
| Tool Kit | Yes | |
| First Aid Box | Yes | |
| Tricycle Seat with Cover | Yes | |
| Hangers for broom and wiper | Yes | |
© 2025 GeM All rights reserved
Site operated and maintained by Managed Service Provider
New on GeM
