menu
GeM Logo, Government of India
gem gem
GeM Logo, Government of India
categories

Catalogue values for Modular Toilet

Category Specification Bid Requirement (Allowed Values)
GENERIC Number of Compartments 1 - seater modular toilet, 2 - seater modular toilet, 3 - seater modular toilet, 4 - seater modular toilet, 6 - seater modular toilet, 8 - seater modular toilet, 10 - seater modular toilet
Type of WC Indian with ceramic pan, Indian with SS pan, Indian with FRP pan, Indian FRP pan with integrated facility(With FRP floor), European with ceramic pan, European with SS pan
Water facility By mean of overhead tank(Capacity 200Ltrs), By mean of overhead tank(Capacity 300Ltrs), By mean of overhead tank(Capacity 500Ltrs), By mean of overhead tank(Capacity 750Ltrs), By mean of overhead tank(Capacity 1200Ltrs), with running water connection, Direct connection from external supply
Sewage facility Sludge tank (capacity-400ltrs) with 100mm outlet facility through butterfly valve and hose pipe(For 4-seater), Sludge tank (capacity-600ltrs) with 100mm outlet facility through butterfly valve and hose pipe(For 6-seater), Sludge tank (capacity-1400ltrs) with 100mm outlet facility through butterfly valve and hose pipe(For 8-seater), Sludge tank (capacity-2000ltrs) with 100mm outlet facility through butterfly valve and hose pipe(For 10-seater), Provision for directly connected to septic tank/sewage, Twin Leech pit with inspection chamber, Sludge tank (capacity-200ltrs) with 75mm outlet facility through butterfly valve and hose pipe(For 1-seater and 2-seater), Sludge tank (capacity-400ltrs) with 75mm outlet facility through butterfly valve and hose pipe(For 3-seater and 4-seater)
ventilation One No., Two No., Full size ventilation above door plus half size ventilation on other side for cross ventilation
Leech pit provision Yes, No
Civil foundation No foundation Required, Required to be provide by seller, Required - to be provide by consignee himself
FRAME MATERIAL Side panel frame material 35mm X 35mm X 5mm(thick) and 5mm X 25mm X 3mm(thick) MS angle (for 4-seater/6-seater/8-seater & 10-seater), No side frame structure
Top(roof) frame material 40mm X 40mm X 5mm(thick)-35mm X 35mm X 5mm(thick) and 25mm X 25mm X 3mm(thick) MS angle, No roof frame structure
Top(roof) support frame structure 40mm X 5mm(thick),35mm X 5mm(thick),25mm X 3mm(thick) MS flat, No support structure
Partition frame material 35mm X 35mm X 5mm(thick),25mm X 25 mm X 3mm(thick) MS angle, No partition frame structure
Ventilation frame material 25mm X 25mm X 3mm(thick) flat MS, 3 sides zero spangled cold rolled 120 GSM galvanised(galvano) powder coated louver panel for cross ventilation with EPS insulated panels(provision for natural light above door), No ventilation frame material
Door frame material 50mm X 25mm of 14-16gauge rectangular MS hollow pipe, 50mm X 25mm of 14-16gauge rectangular SS hollow pipe, Zero spangled cold rolled 120 GSM galvanised(galvano) powder coated with necessary stiffeners and aluminium accessories(2 AI handles - 1 AI tower bolt - 1 AI L-drop(steel sheet thickness - 0.6mm 275 MPA), No door frame material
Support material for Door panel fixing Aluminium U-channel of 18gauge, SS U-channel of 18gauge, No support material
Door hinges(two numbers) 75mm size with 1.2-1.5mm thickness MS, 75mm size with 0.6-0.8mm thickness SS, 75mm size with 1.2-1.5mm thickness Chrome plated
Tank holder frame material 25mm X 3mm(thick) MS flat, 25mm X 3mm(thick) SS flat, 1125mm X 820mm outer ring(tubular structure)-MS
Unit understructure Supported by 4-legs of size 75mm X 37mm C-channel MS angle, Supported by 4-legs of size 75mm X 37mm C-channel SS angle, NO legs base
Stairs frame material 25mm x 25mm X 3mm MS angle, 25mm x 25mm X 3mm SS angle, NO stairs
Stairs material 25mm X 3mm MS flat, 25mm X 3mm SS flat, No stairs material
Door Tee material 40mm X 40mm x40mm X 5mm(thick) MS Tee, 40mm X 40mm x40mm X 5mm(thick) SS Tee, No door Tee material
PANEL MATERIAL Side panel material 5mm thick ply core sandwich with 1mm thick FRP from both sides(5+1+1mm), Single layer 3mm thick FRP, Zero spangled cold rolled 120 GSM galvanised(galvano) powder coated 40mm thick EPS panel(EPS Density-16Kg/CuM EPS thickness-38mm and steel sheet thickness 0.6mm 275MPA), Outside paneling of 18 gauge MS sheet and inside paneling of 18 gauge aluminum sheet(single partition, corrugated sheet, Fitted with plastic light weight LLDPE roto molded, Insulated walls to be made of continue line sandwich panels with 0.35mm thick pre-coated steel sheet(PPGI SHEET) having 120 GSM with minimum 4 microns epoxy primer on both sides of sheet and polyester top coat min 15 microns on both sides of PUF with polyurethane foam(PUF) thickenss-38mm having density 40kg/CUM ±2 kg/CUM
Top(Roof) panel material 5mm thick ply core sandwich with 1mm thick FRP from both sides(5+1+1mm), Single layer 3mm thick FRP, Zero spangled cold rolled 120 GSM galvanised(galvano) powder coated 40-70mm thick taper roof EPS panel(EPS Density-16Kg/CuM EPS thickness-38mm and steel sheet thickness 0.6mm 275MPA), 4mm poly carbonate sheet fitted on top, Fitted with plastic light weight LLDPE roto molded, Insulated walls to be made of continue line sandwich panels with 0.35mm thick pre-coated steel sheet(PPGI SHEET) having 120 GSM with minimum 4 microns epoxy primer on both sides of sheet and polyester top coat min 15 microns on both sides of PUF with polyurethane foam(PUF) thickenss-38mm having density 40kg/CUM ±2 kg/CUM
Door panel material 5mm thick ply core sandwich with 1mm thick FRP from both sides(5+1+1mm), Single layer 3mm thick FRP, Zero spangled cold rolled 120 GSM galvanised(galvano) powder coated with necessary stiffeners and Aluminium accessories (2 AI handles-1 AI tower bolt-1AI L-drop and steel sheet thickness 0.6mm 275MPA), Outside paneling of 18 gauge aluminum sheet(corrugated sheet), Fitted with plastic light weight LLDPE roto molded, Insulated walls to be made of continue line sandwich panels with 0.35mm thick pre-coated steel sheet(PPGI SHEET) having 120 GSM with minimum 4 microns epoxy primer on both sides of sheet and polyester top coat min 15 microns on both sides of PUF with polyurethane foam(PUF) thickenss-38mm having density 40kg/CUM ±2 kg/CUM
partition panel material 5mm thick ply core sandwich with 1mm thick FRP from both sides(5+1+1mm), Single layer 3mm thick FRP, Zero spangled cold rolled 120 GSM galvanised(galvano) powder coated 40mm thick EPS panel(EPS Density-16Kg/CuM EPS thickness-38mm and steel sheet thickness 0.6mm 275MPA), Fitted with plastic light weight LLDPE roto molded, Insulated walls to be made of continue line sandwich panels with 0.35mm thick pre-coated steel sheet(PPGI SHEET) having 120 GSM with minimum 4 microns epoxy primer on both sides of sheet and polyester top coat min 15 microns on both sides of PUF with polyurethane foam(PUF) thickenss-38mm having density 40kg/CUM ±2 kg/CUM
Floor material(inside cubical) 5mm thick FRP material, 2-3mm thick SS material, Fitted with plastic light weight LLDPE roto molded, Anti skid tile finish floor inside toilet
DIMENSION size of each cubical(LXWXH) ± 25mm 890mm X 840mm X 1980mm, 915mm X 915mm x 1980mm, 1220mm X 915mm X 1980mm, 915mm X 435mm X 1955mm, 1220mm X 1220mm X 1980mm, 1830mm X 1220mm X 2050mm (For physically disabled)
Partition height ± 20mm 1830mm, 1900mm, NO partition
Stairs size ± 10mm 610mm X 230mm having 1-step, 610mm X 230mm having 2-step, 610mm X 230mm having 3-step, NO MS stairs
MISC Overhead tank material made of double layer HDPE sheet, made of three layer HDPE sheet, Made of PVC, NO tank
Sewage tank material Sludge tank made of FRP 4mm thick (for 4-seater/6- seater/8-seater and 10-seater), Twin Leech pit with insepction chamber, NO sewage tank
Electric provision By mean solar energy, BY mean of battery, By mean of connection from main line, NO electric provision
Base floor surface(inside) To be suitably slanted towards WC for proper drainage(for Indian WC), N.A
Raised platform for passage Width of passage 1220mm and height of passage above ground level 225mm antiskid block finish on passage only, N.A
CIVIL FOUNDATION DETAILS Brick foundation size 200mm X 200mm with depth of 200mm from ground level for anchor/column locations, N.A
Pocket to be filled With PCC of 1:2:4 ratio after grouting of steel element of structure, N.A
Plinth height 300mm with 125mm brick plus 1:5 mortar, N.A
Platform size 1125mm X 1500mm, N.A
Soling height 75mm by single brick flat, N.A
Floor casting 75mm thick PCC of 1:2:4 ratio above brick flat soling, N.A
Outside plinth plaster 15mm thick on brick work with CM 1:5, N.A
Stairs dimension Two Nos. stair of size 250mm(W) X 900mm(L) X 150mm(H), N.A
TWIN LEECH PIT Twin leech pit with inspection chamber 1000mm Dia and 1000mm deep, N.A
Construction of leech pit made out of 40-50mm thick concrete rings/brick work with sufficient holes, N.A
Top cover 75mm RCC slab(1:4:8 C:S:A), N.A
Dimension(inside) of one inspection chamber 375mm X 375mm X 300mm(depth), N.A
Base of chamber 75mm thick PCC in 1:5:10, N.A
Finishing of chamber(inside surface) 10mm thick cement plaster in 1:4, N.A
Pipe connection To be between Toilet structure-inspection channel and leech pit, N.A
WARRANTY Warranty period in number of years 1, 2, 3