Catalogue values for Classroom Desking and Seating (V2)
| Category | Specification | Bid Requirement (Allowed Values) |
|---|---|---|
| GENERAL REQUIREMENT | Classroom desking and seating type | Three seater classroom desking drawing |
| Style | Desking and seating (Integrated) | |
| Desking with shelf (under storage) | Yes, No | |
| Desking with modesty panel | In single piece, In two pieces, Not required | |
| Provision of PU foam | Seat, Backrest, Not required | |
| Desking under structure (support frame type) | Four legs support | |
| Seating under structure (support frame type) | C-Type frame, H-Type frame, Four legs support | |
| MATERIAL | Desking under structure support and frame material | Steel tubes confirming to IS 7138 – 1973 (with latest amendment), Mild Steel ERW hollow section, Steel tubes confirming to IS 3074 – 2013 (with latest amendment), Cold reduced carbon steel “Grade CR2” sheet confirming to IS 513: PART 1: 2016 (with latest amendment) |
| Thickness of desking under structure support and frame material (± 5%) | 0.8 mm, 1.0 mm, 1.1 mm, 1.2 mm, 1.6 mm, 2.0 mm, 2.5 mm | |
| Seating under structure support and frame material | Steel tubes confirming to IS 7138 – 1973 (with latest amendment), Mild Steel ERW hollow section, Steel tubes confirming to IS 3074 – 2013 (with latest amendment), Cold reduced carbon steel “Grade CR2” sheet confirming to IS 513: PART 1: 2016 (with latest amendment) | |
| Thickness of seating under structure support and frame material (± 5%) | 0.8 mm, 1.0 mm, 1.1 mm, 1.2 mm, 1.6 mm, 2 mm, 2.5 mm | |
| Shelf (under storage) material | Cold reduced carbon steel “Grade CR2” sheet, confirming to IS 513: PART 1: 2016 (with latest amendment), BWR Plywood confirming to IS 303 (with latest amendment), MDF board confirming to IS 12406 (with latest amendment), Prelaminated MDF board confirming to IS 14587 (with latest amendment), Prelaminated Particle board Grade I type II confirming to IS 12823 (with latest amendment), Prelaminated Particle board Grade II type II confirming to IS 12823 (with latest amendment), Metal wire mesh, Solid wood, Plastic, Not required | |
| Thickness /diameter of shelf (under storage) material (± 5 %) | 0.5 mm, 0.6 mm, 0.8 mm, 1 mm, 1.2 mm, 1.5 mm, 2 mm, 2.5 mm, 3 mm, 5 mm, 6 mm, 10 mm, 12 mm, 15 mm, 16 mm, 18 mm, 19 mm, 20 mm, 25 mm, Not required | |
| Desking top material | Cold reduced carbon steel “Grade CR2” sheet, confirming to IS 513: PART 1: 2016 (with latest amendment), Prelaminated MDF board confirming to IS 14587 (with latest amendment), Prelaminated Particle board Grade I type II confirming to IS 12823 (with latest amendment), Prelaminated Particle board Grade II type II confirming to IS 12823 (with latest amendment), Decorative thermosetting synthetic resin bonded laminated confirming to IS 2046:1995 (with latest amendment), BWR Plywood confirming to IS 303 (with latest amendment), Teak wood, Mango wood, Plastic | |
| Thickness of desking top material (± 5 %) | 0.5 mm, 0.8 mm, 1 mm, 1.2 mm, 1.5 mm, 2 mm, 2.5 mm, 3 mm, 5 mm, 10 mm, 11 mm, 12 mm, 15 mm, 16 mm, 18 mm, 19 mm, 20 mm, 25 mm | |
| Seating material | Cold reduced carbon steel “Grade CR2” sheet, confirming to IS 513: PART 1: 2016 (with latest amendment), Prelaminated MDF board confirming to IS 14587 (with latest amendment), Prelaminated Particle board Grade I type II confirming to IS 12823 (with latest amendment), Prelaminated Particle board Grade II type II confirming to IS 12823 (with latest amendment), Rubber wood board, Decorative thermosetting synthetic resin bonded laminated confirming to IS 2046:1995 (with latest amendment), BWR Plywood confirming to IS 303 (with latest amendment), Teak wood, Mango wood, Plastic | |
| Thickness of seating material (± 5 %) | 0.5 mm, 0.8 mm, 1 mm, 1.2 mm, 1.5 mm, 2 mm, 2.5 mm, 3 mm, 5 mm, 10 mm, 11 mm, 12 mm, 15 mm, 16 mm, 18 mm, 19 mm, 20 mm, 22 mm, 25 mm | |
| Backrest material | Cold reduced carbon steel “Grade CR2” sheet, confirming to IS 513: PART 1: 2016 (with latest amendment), Prelaminated MDF board confirming to IS 14587 (with latest amendment), Prelaminated Particle board Grade I type II confirming to IS 12823 (with latest amendment), Prelaminated Particle board Grade II type II confirming to IS 12823 (with latest amendment), Rubber wood board, Decorative thermosetting synthetic resin bonded laminated confirming to IS 2046:1995 (with latest amendment), BWR Plywood confirming to IS 303 (with latest amendment), Plastic, Mango wood, Teak wood, Not required | |
| Thickness of backrest material (± 5 %) | 0.5 mm, 0.6 mm, 0.8 mm, 1 mm, 1.2 mm, 1.5 mm, 2 mm, 2.5 mm, 3 mm, 5 mm, 10 mm, 11 mm, 12 mm, 15 mm, 16 mm, 18 mm, 19 mm, 20 mm, 25 mm, Not required | |
| Desking /side material | Cold reduced carbon steel “Grade CR2” sheet, confirming to IS 513: PART 1: 2016 (with latest amendment), Prelaminated MDF board confirming to IS 14587 (with latest amendment), Prelaminated Particle board Grade I type II confirming to IS 12823 (with with latest amendment), Prelaminated Particle board Grade II type II confirming to IS 12823 (with latest amendment), Rubber wood board, Decorative thermosetting synthetic resin bonded laminated confirming to IS 2046:1995 (with latest amendment), Cold reduced carbon steel “Grade CR2” sheet confirming to IS 513: PART 1: 2016 (with latest amendment), Solid wood, Plastic, Not required | |
| Thickness of desking /side material (± 5 %) | 0.5 mm, 0.6 mm, 0.8 mm, 1 mm, 1.2 mm, 1.5 mm, 2 mm, 2.5 mm, 3 mm, 5 mm, 10 mm, 11 mm, 12 mm, 15 mm, 16 mm, 18 mm, 19 mm, 20 mm, 25 mm, Not required | |
| Seating side material | Perforated MS sheet, Plywood Confirming to IS 303, Flat single-layer Prelaminated MDF board confirming to having designation PLMDF-23 of IS 14587 (with latest amendment), Prelaminated Particles board (wood product) of grade II type III of IS 12823 (with latest amendment), Commercial Block Board BWP grade Confirming to IS 1659 (with latest amendment), Decorative Block Board BWP grade Confirming to IS 1659 (with latest amendment), Commercial Block Board MR Grade Confirming to IS 1659 (with latest amendment), Decorative Block Board MR Grade Confirming to IS 1659 (with latest amendment), Acrylic Sheet, Solid wood, Not required | |
| DIMENSION | Length of Desking, Seating and Backrest (±10 mm) | 1400 mm, 1450 mm, 1500 mm, 1550 mm, 1600 mm, 1650 mm, 1700 mm, 1750 mm, 1800 mm, 1850 mm, 1900 mm, 1950 mm, 2000 mm |
| Width of desk top material (± 5 mm) | 300 mm, 325 mm, 350 mm, 380 mm, 400 mm, 450 mm, 520 mm, 600 mm, 650 mm, 700 mm, 750 mm, 800 mm | |
| Width of seat material (± 5 mm) | 260 mm, 280 mm, 300 mm, 320 mm, 340 mm, 360 mm, 380 mm, 400 mm, 420 mm, 450 mm, 500 mm, 550 mm, 570 mm, 600 mm, 650 mm | |
| Width of the backrest material (± 5 mm) | 130 mm, 140 mm, 150 mm, 160 mm, 170 mm, 200 mm, 220 mm, 240 mm, 260 mm, 270 mm, 280 mm, 300 mm, 325 mm, 370 mm, 430 mm, 470 mm, Not required | |
| Height of desk top from floor (±5 mm) | 500 mm, 520 mm, 550 mm, 580 mm, 600 mm, 650 mm, 700 mm, 710 mm, 730 mm, 750 mm, 770 mm, 810 mm, 850 mm, 875 mm, 900 mm, 920 mm, 940 mm, 1000 mm | |
| Width of uplift modesty panel | 250 mm, 300 mm, 350 mm, 400 mm, 600 mm, Not required | |
| Height of Seat from floor (± 5 mm) | 260 mm, 300 mm, 340 mm, 350 mm, 370 mm, 380 mm, 390 mm, 400 mm, 420 mm, 440 mm, 450 mm, 460 mm, 500 mm, 550 mm, 600 mm, 650 mm, 700 mm, 750 mm, 800 mm | |
| Size of desking under structure support and frame material (L x W /major axis x minor axis /diameter) | 35 X 15 (mm), 50 X 25 (mm), 40 X 20 (mm), 60 X 35 (mm), 25 X 25 (mm), 30 X 30 (mm), 40 X 40 (mm), 20 X 40 (mm), 25 X 40 (mm), 20 X 60 (mm), 45 X 45 (mm), 60 X 30 (mm), 70 X 22 (mm), 95 x 25 (mm), 165 x 25 (mm), 22 mm, 25 mm, 30 mm, 32 mm, 35 mm, 40 mm, 45 mm, 50 mm, 55 mm, 60 mm | |
| Size of seating under structure support and frame material (L x W /major axis x minor axis /Diameter) (± 2 mm) | 35 X 15 (mm), 50 X 25 (mm), 40 X 20 (mm), 60 X 35 (mm), 25 X 25 (mm), 30 X 30 (mm), 40 X 40 (mm), 20 X 40 (mm), 25 X 40 (mm), 20 X 60 (mm), 45 X 45 (mm), 60 X 30 (mm), 70 X 22 (mm), 95 x 25 (mm), 165 x 25 (mm), 22 mm, 25 mm, 30 mm, 32 mm, 35 mm, 40 mm, 45 mm, 50 mm, 55 mm, 60 mm | |
| Distance between table top edge and seat edge (± 2 mm) | 125 mm, 140 mm, 160 mm, 200 mm, 250 mm, 300 mm, 320 mm, 340 mm, 360 mm, 380 mm, 400 mm | |
| COLOUR AND FINISH | Material of Finish /Lamination (for other than metal) | Veneer, PU coat, Membrane, Compact Laminate, Paper based laminate, Type S, P or F confirming to IS 2046 (with latest amendment), Post forming lamination (one side decorative laminate and other side balancing), Not required |
| Thickness of Finish /Lamination (for other than metal) | 0.4 mm, 0.6 mm, 0.72 mm, 0.8 mm, 1 mm, 1.5 mm, 3.5 mm, 4 mm, Not required | |
| Edge Finish of Desk | PVC Edge banding, Teak wood batten, ABS plastic, PP moulded, Post formed, Not required | |
| Edge Finish of Seat and Backrest | PVC Edge banding, Teak wood batten, ABS plastic, PP moulded, Post formed, Not required | |
| Edge Finish of shelf /under storage | PVC Edge banding, Teak wood batten, ABS plastic, PP moulded, Post formed, Not required | |
| Edge banding thickness (desk /Seat and Backrest /shelf or under storage) | 1 mm, 1.5 mm, 2 mm, 2.5 mm, 4 mm, 5 mm, Not required | |
| WARRANTY | Warranty period | 1 Year, 2 Years, 3 Years, 4 Years, 5 Years |
| CERTIFICATION | Test reports to be furnished to buyer on demand | Yes, No |
© 2025 GeM All rights reserved
Site operated and maintained by Managed Service Provider
New on GeM
