Catalogue values for Integrated Powered Drill and Debrider system
| Category | Specification | Bid Requirement (Allowed Values) |
|---|---|---|
| General | Application | ENT, Otology, Sinus Surgeries, Head & Neck Surgeries, Tonsillectomy(PITA), Pituitary procedures, Thyroid procedures |
| Touch screen control | Yes | |
| Purpose | For shaving soft tissues and drilling & sawing bones in the ENT and Cranial anatomies | |
| Emergency switch during footswitch failure | Yes | |
| Performance IPC | Integrate with Intra-operative Nerve Integrity monitor | Yes |
| Irrigation pump rate (Min.) cc/min | 5 | |
| handpiece regognition feature with auto default settings | Yes | |
| Irrigation pump rate (Max.) cc/min | 100 | |
| Integrate with Electro-magnetic(EM) Navigation system | Yes | |
| Ability to drive Stapes drill | Yes | |
| Ability to drive High-speed otology drill | Yes | |
| control speed of motor from footswitch | Yes | |
| Ability to drive Endoscope lens cleaning system | Yes | |
| provide warning for handpiece error | Yes | |
| change mode of motor rotation: forward or reverse or oscillation from footswitch | Yes | |
| toggle between different handpieces from footswitch | Yes | |
| Performance IPC of Max rotational speed per minute rpm | 30000 | |
| Max oscillation speed per minute | 7500 | |
| Ability to drive Trans-Nasal Micro-debrider | Yes | |
| Handpieces | Skeeter | 1 |
| ENT MR8 | 1 | |
| M2 | 0 | |
| M5 | 1 | |
| M5 | Curved sinus blade-120 degrees : 3.5mm for M5 | 3 |
| Rotatable Tricut Straight blade 11cm long, 4.0 mm | 5 | |
| Adenoiectomy blades, 4mm, 40 for M5 | 5 | |
| Rotatable Inferior Turbinectomy blades : 2.9mm | 5 | |
| Electro-magnetic Navigation compatible blades | Yes | |
| Max oscillation speed opm for M5 | 7500 | |
| compatible with IPC console for M5 | Yes | |
| DCR Bur, 2.5mm 20 diamond for M5 | 3 | |
| DCR Bur, 4.0mm, 15 Cutting for M5 | 3 | |
| Tonsillectomy blades for M5 | No | |
| Rotatable Tricut airway blades, 15, 4.0mm, 27cm | 6 | |
| Direct motor +C47drive(Gearless) | Yes | |
| Max rotational speed per minute rpm for M5 | 30000 | |
| Rotatable Curved sinus blade-90 degrees : 3.5mm | 3 | |
| Hand rotation of blades from debrider handpiece | Yes | |
| Rotatable Curved sinus blade-40 degrees: 4.0mm | 5 | |
| Straight through suction | Yes | |
| Rotatable Skimmer blades, 15, 2.9mm, 27cm | 1 | |
| Rotatable Curved sinus blade-60 degrees: 4.0mm | 5 | |
| Rotatable Curved sinus blade-12 degrees: 3.5mm | 1 | |
| M2 | Curved sinus blade-12 degrees: 3.5mm | 0 |
| Skimmer blades, 15, 2.9mm, 22cm | 0 | |
| Curved sinus blade-60 degrees: 4.0mm | 0 | |
| Tricut Straight blade 11cm long, 4.0mm | 5 | |
| Max oscillation speed opm | 5000 | |
| DCR Bur, 4.0mm, 15 Cutting | 0 | |
| Curved sinus blade-120 degrees : 3.5mm | 0 | |
| Compatible with IPC console for M2 | Yes | |
| Adenoiectomy blades, 4mm, 40 | 0 | |
| Skimmer blades, 15, 4.0mm, 27cm | 0 | |
| Inferior Turbinectomy blades : 2.9mm | 0 | |
| Max rotational speed per minute rpm | 12000 | |
| Curved sinus blade-40 degrees: 4.0mm | 0 | |
| Tonsillectomy blades | Yes | |
| DCR Bur, 2.5mm 20 diamond | 0 | |
| ENT MR8 | max speed (rpm) | 75000 |
| BUR CUT FINE 2MM STD | 1 | |
| BUR CUT FINE 4MM STD | 1 | |
| Straight attachment | 1 | |
| BUR CUT FINE 5MM STD | 1 | |
| BUR CUT FINE 6MM STD | 1 | |
| BUR DMD FINE 5MM STD | 1 | |
| Angled attachment+C109 | 1 | |
| BUR DMD FINE 4MM STD | 1 | |
| BUR DMD FINE 6MM STD | 1 | |
| BUR CUT FINE 3MM STD | 1 | |
| Compatible with IPC console | Yes | |
| BUR CUT FINE 1MM STD | 1 | |
| BUR DMD FINE 3MM STD | 1 | |
| BUR DMD FINE 2MM STD | 1 | |
| BUR DMD FINE 1MM STD | 1 | |
| Skeeter | compatible with IPC console | Yes |
| colour coded burs for each diameter recognition | Yes | |
| cutting carbide bur: 0.5mm diameter | 1 | |
| cutting carbide bur: 0.7mm diameter | 1 | |
| cutting carbide bur: 0.8mm diameter | 1 | |
| cutting carbide bur: 1.0mm diameter | 1 | |
| cutting carbide bur: 1.4mm diameter | 1 | |
| cutting carbide bur: 1.8mm diameter | 0 | |
| diamond bur: 0.6mm diameter | 1 | |
| diamond bur: 0.7mm diameter | 1 | |
| diamond bur: 0.8mm diameter | 1 | |
| diamond bur: 1.0mm diameter | 1 | |
| diamond bur: 1.4mm diameter | 0 | |
| diamond bur: 1.8mm diameter | 0 | |
| the burrs should be malleable | Yes | |
| Compatible crura-Saw | 0 | |
| Compatible Diamond knife | 0 | |
| Compatible drill | 0 | |
| Compatible perforator - 0.5mm | 0 | |
| Compatible perforator - 0.35mm | 0 | |
| Standards | Functional Standards for Electrical Systems | IEC 60601-1, ANSI/AAMI ES60601-1, EN 60601-1, IEC 60601-1-4, EN 60601-1-2CAN/CSA C22.2 No. 60601-1 |
| Test Report | Availability of Type Test Report for conformity of parameters from any ILAC/NABL accredited/Central Gov. LAB | Yes |
| Test report to be submitted to the Buyer on Demand | Yes | |
© 2025 GeM All rights reserved
Site operated and maintained by Managed Service Provider
New on GeM
