Catalogue values for Tractor Trailer Mounted Suction Machine as per IS 13496
| Category | Specification | Bid Requirement (Allowed Values) |
|---|---|---|
| Generic Parameters | GVW of Trailer | 4000.0 Or higher |
| Wheel base | 3300.0 Or higher | |
| Payload capacity of trailer | 3500.0 Or higher | |
| Constructional Parameters | Capacity of split shaft PTO (Kgm) | 20 |
| Overall Length | 5200.0 Or higher | |
| Overall Width | 2050.0 Or higher | |
| Derrick Arm Available | No | |
| Vacuum Pump Flow (Cu-m/hr) | 395.0 Or higher | |
| Vacuum Suction Depth (as per IS:13496 latest) | 8.0 Or higher | |
| Suction Hose Internal Diameter (as per IS:13946 latest) | 75.0 | |
| Suction Hose Length | 3.0 Or higher | |
| Number of Suction Hose (Nos) | 5.0 Or higher | |
| Total Tank Capacity (sludge tank+water tank) | 3500.0 - 8000.0 Or higher | |
| Water storage Tank Capacity | 500.0 Or higher | |
| Thickness of tank plate (It shall be designed at a safety factor of 4 times the operating pressure)as per IS 13496 | 5.0 Or higher | |
| Thickness of Cover for Engine, Pump and Hose Reel compartment | 3.0 Or higher | |
| Material of Cover for Engine, Pump and Hose Reel compartment | MS Sheet | |
| Performance Parameters | Warranty Time | 24.0 Or higher |
© 2025 GeM All rights reserved
Site operated and maintained by Managed Service Provider
New on GeM
