Catalogue values for Cobbler Shed
| Category | Specification | Bid Requirement (Allowed Values) |
|---|---|---|
| FRAME MATERIAL | Vertical main frame angles at all the four corners ( total 4 Nos ) | Made of hot rolled medium and high tensile structural steel confmg. to IS 2062 - 2011 (amended up to date ) Grade E250A in size 50 mm x 50 mm x 5 mm |
| Horizontal frame angles - 4 Nos each on top and bottom ( total 8 Nos ) | Made of hot rolled medium and high tensile structural steel confmg. to IS 2062 - 2011 (amended up to date ) Grade E250A in size 40 mm x 40 mm x 5 mm | |
| Support centre frame angles from three sides ( total 3 Nos ) | Made of hot rolled medium and high tensile structural steel confmg. to IS 2062 - 2011 (amended up to date ) Grade E250A in size 35 mm X 35 mm X 4 mm | |
| Central gable frame angles ( total 5 Nos ) | Made of hot rolled medium and high tensile structural steel confmg. to IS 2062 - 2011 (amended up to date ) Grade E250A in size 25 mm X 25 mm X 3 mm | |
| Door frame angles | Made of hot rolled medium and high tensile structural steel confmg. to IS 2062 - 2011 (amended up to date ) Grade E250A in size 35 mm X 35 mm X 4 mm | |
| GENERIC | Configuration | Assembly shed shall be in 4 main pieces i.e Hinged door and each side as 1 piece – Back and Top |
| Provision of shelf (for display selling goods ) | Inside - rested on back panel of the stall. | |
| Number of shelf for display selling goods ( Inside - rested on back panel of stall ) | No shelf on back panel | |
| Number of shelf for display selling goods ( Inside - rested on left panel of the stall) | 2 Nos., 3 Nos., 4 Nos., 5 Nos., No shelf on left panel | |
| Number of shelf for display selling goods (Inside - rested on right panel of the stall) | No shelf on right panel | |
| Provision for door locking | By fixing a door Aldrop | |
| Scope of supply | Supply and Installation | |
| Transportations / Freight charges | Offer Prices are on Free Delivery at Consignee site basis | |
| Approval of Advance sample before Bulk Supply | After award of contract, Seller shall have to get proto type Advance sample approved from Buyer before manufacturing / starting Bulk supplies. Buyer shall approve / provide list of modifications required within 10 days of offer of advance sample. If there is delay in approval of advance sample from Buyer side, the delivery period shall be regularized for the period of delay in sample approval | |
| PANEL & OTHER MATERIALS | Sides panel material | Made of corrugated galvanized steel sheets confmg. to IS 277 - 2018 ( amended up to date ) Grade 275 designation GC in 20 SWG (0.914 mm ± 0.1 mm ) |
| Back panel material | Made of corrugated galvanized steel sheets confmg. to IS 277 - 2018 ( amended up to date ) Grade 275 designation GC in 20 SWG (0.914 mm ± 0.1 mm ) | |
| Door panel material | Made of corrugated galvanized steel sheets confmg. to IS 277 - 2018 ( amended up to date ) Grade 275 designation GC in 20 SWG (0.914 mm ± 0.1 mm ) | |
| Bottom Panel material | Made of MS plate having 3 mm thickness with galvanizing as per IS 277:2018 (amended upto date ) with 600 grade of coating. | |
| Top panel material | Made of galvanized steel sheet confmg. to IS 277 - 2018 amended upto date with 275 Grade of coating in 20 SWG (0.914 mm ± 0.1 mm ) | |
| Shelf material | MS Epoxy Polyester Powder coated with a dry film thickness of minimum 60 to 86 microns (Tested as per IS 101: Part-3: Sec-2 - 1989 | |
| Material for the bolt / rivet / weld G P Sheets with angles from inside | To be use Hot dip galvanized strip of size 18 x 3.15 mm thick confmg. to IS 1730:1989 (amended upto date) and strip galvanized as per IS 277:2018 grade 600 | |
| Fasteners to be used to join all panels | As per IS 1367 (Part 1) : 2002 Gr 8.8 of size M8 and M10 | |
| Door Aldrop material | MS (Mild Steel) | |
| DIMENSION | Width of Cobbler shed | 1520 mm |
| Depth of cobbler shed | 1220 mm | |
| Wall height at eaves | 1830 mm | |
| Wall height at central gable | 2150 mm | |
| Central gable height from side walls | 320 mm | |
| Central gable height from ground | 2300 mm | |
| Width of door panels | 760 mm | |
| Size of shelf - rest on back panel of stall | 300 mm x 1520 mm x 2 mm thick | |
| Size of shelf - rest on Left panel of stall (to be declared from buyer - Write NA if not applicable) | 300 mm x 1520 mm x 2 mm thick | |
| Size of shelf - rest on Right panel of stall(to be declared from buyer - Write NA if not applicable) | N.A. | |
| Size of floor base plate | 1220 mm x 1520 mm x 3 mm | |
| Size of Galvanised base plate - to be welded at bottom of angles | 4 nos. of size 150 mm Dia x 5 mm thickness | |
| Ground Clearance (Leg height) | 150 mm | |
| Pitch of Corrugation (Flute width in corrugated sheet in mm) ± 5 mm | 50 | |
| Depth of corrugation ( Flute depth in Corrugated Sheet in mm) ± 3 mm | 15 | |
| Size of Door Aldrop | 250 mm x 12 mm duly welded and riveted on strengthening plate of 3 mm thickness from both the side | |
| COLOR AND FINISH | Finish of angles structure | Epoxy polyester powder coated involving 8 steps treatment consisting of Hot water rinse – Knock of degreasing – Greasing cold water rinse – Phosphatic cold water rinse – Passivation and dry off over treatment final finish as per approved color / shade with a dry film thickness of minimum 60 to 86 microns confmg. to IS 101 : Part – 3 : Sec – 2 – 1989 (amended upto date) |
| Sides panel – door panels and back panels shall be painted | No | |
| Paints | N.A | |
| Finish of Paints | N.A | |
| WARRANTY | Warranty period in number of years | 1, 2, 3, 4, 5 Or higher |
© 2025 GeM All rights reserved
Site operated and maintained by Managed Service Provider
New on GeM
