Catalogue values for Surf Board - Outdoor Gym Equipment
| Category | Specification | Bid Requirement (Allowed Values) |
|---|---|---|
| TYPE | Type | Double |
| CAPACITY | Maximum User Weight ( Kg ) | 120.0 |
| MATERIAL | Governing Specification for GI Pipes | BIS specification No IS 1161:2014, latest |
| All the GI Pipes are ISI marked | Yes | |
| Main Central Pipe | 150mm Nominal Bore G.I. Pipe | |
| Main Frame Pipe, Class as per IS 1239 | Heavy | |
| Main Central Pipe ( As per Clause 3, of IS 1161 ) Nominal Bore & Wall Thickness | 150 mm NB,165.1 mm OD & 4.5 mm Thickness | |
| Grade Material as per table 2 of IS 1161 | Not Applicable | |
| Movement (Paddle) Frame | 32mm Nominal Bore G.I. Pipe | |
| Movement ( Paddle ) Frame Pipe, Class as per IS 1239 | Medium | |
| Movement ( Paddle ) Frame Pipe ( As per as per Clause 3, of IS 1161 ) , Nominal Bore & Wall Thickness | 32 mm NB with 2.6 mm Thickness | |
| Grade Material as per table 2 IS 1161 | Not Applicable | |
| Connecting Links | 32 mm Nominal Bore G.I. Pipe | |
| Connecting Links Pipe, Class as per IS 1239 | Medium | |
| Connecting Link Pipe ( As per Clause 3, of IS 1161 ) Nominal Wall & Thickness | 32 mm NB with 2.6 mm Thickness | |
| Grade Material (as per table 2 of IS 1161 ) | Not Applicable | |
| Handle Frame | 32mm Nominal bore G.I. pipe | |
| Handle Frame Pipe, Class as per IS 1239 | Medium | |
| Handle Frame Pipe ( as per IS 1161 ) as per clause 3, Nominal Wall & Thickness | 25 mm NB with 2.6 mm Thickness | |
| Grade Material per table 2 of IS 1161 | Not Applicable | |
| Foundation Pipes with anchoring | 500mm deep GI Pipe, supported with M.S. Angle 25 X 25 X 4mm | |
| Nominal Bore of Foundation Pipe | 100mm | |
| Foundation Pipe, Class as per IS 1239 | Heavy | |
| Foundation Pipe Pipe ( as per IS 1161 ) as per clause 3, Nominal Wall & Thickness | 100 mm NB with 4.5 mm Thickness | |
| Grade Material (as per table 2 of IS 1161) | Not Applicable | |
| M S Foundation Plate Thickness | 12.0 | |
| Bearings | Ball Bearing | |
| Foot Rest | Fibre Reinforced Plastic | |
| OTHER REQUIREMENTS | Installation | Included |
| CERTIFICATION | Certfication ( Safety and Quality Requirements ) | As per European Standard EN 16630 |
| WARRANTY | Warranty ( years ) | 2.0 |
© 2025 GeM All rights reserved
Site operated and maintained by Managed Service Provider
New on GeM
