Catalogue values for Frequency Counter as per IS 9000
| Category | Specification | Bid Requirement (Allowed Values) |
|---|---|---|
| FEATURES | Frequency Range | 2 mHz to 6 GHz |
| Number of Channels | 2 | |
| Type of Input Signal | Burst, AM, FM, Noise Signal | |
| Resolution (Digit) | 12 | |
| Input Impedance | 1 M Ohm and 50 Ohm (Selectable) | |
| Trigger Slope | Positive, Negative | |
| Aging Rate Per Year (As declared by the OEM) | 0.2 PPM or Better | |
| Measurement | Frequency / Period, Time, Phase, Volt, Duty Cycle, Pulse, Rise Time | |
| Number of Digits | Programmable | |
| Time Base Type | OCXO | |
| Gate Time | 100 micro sec to 1000 sec or better | |
| Single Shot Time Resolution | 100.0 | |
| Temperature Stability at 26 Degree C | .02 PPM | |
| OPERATING CONDITION | Minimum Operating Temperature | 0.0 |
| Maximum Operating Temperature | 55.0 | |
| Operating Humidity (RH) @ 40 deg C | 80.0 | |
| Storage Temperature (Degree C) | -30 to 50 degree C | |
| POWER SUPPLY | Power Rating | 70, 80, 90 Or lower |
| GENERIC | Indication | Frequency/Level/ Status Indication(Histogram) |
| SERVICE | Warranty | 3 Or higher |
| CERTIFICATION AND TEST REPORT DETAILS | Safety Certification (Certificate to be furnished when demanded by buyer) | UL, CSA |
| conformity to Dry Heat for 16 hrs at a specified maximum temp in accordance with IS:9000/part-3/section-5/1977 latest | Yes | |
| conformity to Cold Test for 4 hrs at a specified minimum temp in accordance with IS:9000/part-2/section-4/1977 latest | Yes | |
| Conformity to Damp Heat (Cyclic)Test : for 2 Cycles of 24 hrs each at a temp of 40 degree C & 95% RH | Yes | |
| Availability of Test Reports from Central Govt/NABL/ILAC approved accredited lab to prove conformity to the specification | Yes | |
© 2025 GeM All rights reserved
Site operated and maintained by Managed Service Provider
New on GeM
