Catalogue values for Lathe Machine as per IS 6893:1988
| Category | Specification | Bid Requirement (Allowed Values) |
|---|---|---|
| Standards | Lathe Machine Confirming to IS 6893-1988 Latest (For Technical Evaluation) | Yes |
| Lathe Machine Material Confirming to IS 210 Latest(For Casting ) | Yes | |
| Performance Parameters | Lathe Machine Type | High Speed Precision Lathe |
| Nature of Duty of Operation of Lathe | High Speed Precision Lathe | |
| Distance Between centers (mm) x Swing over Bed (mm) | 1500 x 600 | |
| Swing Over Bed (in mm) | 575.0 | |
| Center Height in mm | 260.0 | |
| Swing Over Cross Slide in mm | 350.0 | |
| Swing Over Carriage Wing in mm | 545.0 | |
| Swing in Gap in mm | 800.0 | |
| Width of Gap in Front in mm | 175.0 | |
| Type of Bed | Inverted V type | |
| Length of Bed in mm | 2720.0 | |
| Width of Bed in mm | 175.0 | |
| Gap in Bed in mm ( Only for Gap Lathe ) for rest Put 0 | 0.0 | |
| Rapid Transverse of saddle & Cross Slide | Yes | |
| Maximum Feed Force | 500 | |
| Maximum Facing Diameter in mm | 600.0 | |
| Maximum Weight of work piece that can be held between chuck and supported by Live center in kg | 600.0 | |
| Maximum Weight of work piece that can be held between chuck and supported by dead center in kg | 600.0 | |
| Maximum Torque on Spindle in NM | 11 | |
| Size of Spindle in mm | 165.0 | |
| Type of Chuck | 3 Jaw Self Centered | |
| Travel of Cross Slide in mm | 300.0 | |
| Travel of Top Slide in mm | 150.0 | |
| Main Motor Power in kw | 11.0 | |
| Types of power supply | 3 Phase | |
| Erection and Commisioning Charges included in Offered Prices without Foundation | Yes | |
| Warranty in Years | 1 | |
| Annual Maintenance Contract Rate included for Machine | No | |
| Period of AMC | 0 | |
| Coolant Pump output in kw as per IS 2161:1962 Latest | 0.12 | |
| Dimensional Parameters | Minimum Chucking Diameter in mm | 10.0 |
| Maximum Chucking Diameter in mm | 600.0 | |
| Tail Stock Sleeve Diameter in mm | 90.0 | |
| Maximum Offset of Tailstock on either side of Center Line in mm | 4.0 | |
| Sleeve Travel Type(Tail Stock) | Manual | |
| Length of Lathe Machine in mm | 2965.0 | |
| Width of Lathe Machine in mm | 1176.0 | |
| Height of Lathe Machine in mm | 1490.0 | |
| Weight of Lathe Machine with electrical and standards Accessories | 2500.0 | |
© 2025 GeM All rights reserved
Site operated and maintained by Managed Service Provider
New on GeM
