Catalogue values for Inverter (V2)
| Category | Specification | Bid Requirement (Allowed Values) |
|---|---|---|
| INVERTER | Output Rating of the Inverter (in KVA) | 1.5, 2, 2.5 |
| Input - Operating Voltage of the Inverter (hint: The input range specified is minimum requirement; Wider input ranges shall also be acceptable being considered better provided meeting the performance requirement) | 1 phase 180V -260V, 50 Hz AC mains | |
| Output Voltage of the Inverter ( in inverter mode) | 1 phase 220V +/- 10 V, 50 Hz AC | |
| BATTERY | Provision of battery with each inverter for backup | Yes |
| Type of Battery | SMF-VRLA conforming to JISC- 8702 (Pt. I,II&III), Stationary Lead Acid Batteries (with tubular positive plates) in monobloc container conforming to IS 13369 | |
| Minimum Capacity of Each Battery ( in Ah) (hint: Write '0' in case battery not provided) | 150.0 | |
| Battery Voltage (in volts)(hint: Write '0' in case battery not provided) | 12.0 | |
| DC Bus Voltage (in volts) (hint: Write '0' in case battery not provided) | 24.0 | |
| PERFORMANCE | Total harmonic distortion (THD) | |
| ACCESSORIES/ TROLLEY/ RACK | Provision of Suitable Trolley/ Rack for Batteries | Yes, No |
| INSTALLATION AND COMMISSIONING OF SERVICE | After Sales Service (Turn Around Time) | Within 48 hours |
| Preventive Maintenance (Hint: Mention Timeline if provided, NA if not provided) | NA, Yearly, Half Yearly, Quarterly, Bi-Monthly, Monthly Or higher | |
| BUYER SPECIFIC REQUIREMENT | Battery Test Report (hint : Select NA in case of no battery) | Type Test Report as per relevant governing specifications from Govt Lab/NABL accredited lab |
| CERTIFICATION/TEST REPORT | Availability of test report for inverter to prove conformity of the specification from | Govt. Lab/NABL accredited Lab/ILAC accredited Lab |
© 2025 GeM All rights reserved
Site operated and maintained by Managed Service Provider
New on GeM
