Catalogue values for Office Chair (V3)
| Category | Specification | Bid Requirement (Allowed Values) |
|---|---|---|
| GENERAL REQUIREMENT | Chair type | Non-revolving and non-tilting chair with armrest |
| UNDERSTRUCTURE | Chair understructure type | Cantilever |
| Understructure material | ERW tube conforming to IS : 1161 latest | |
| The shape of tubular section of understructure | Round, Square, Rectangular, Elliptical | |
| Section Size (Diameter/Sides) of understructure | 19 mm, 22 mm, 25 mm, 30 mm, 19x19 mm, 25x25 mm, 30x30 mm, 25x15 mm, 30x12 mm, 30x15 mm, 30x20 mm, 45x19 mm, 35x15 mm, 38x20 mm | |
| Understructure wall thickness (mm) | 1.2, 1.6, 2, 2.5, 3 | |
| Castor | Yes, No | |
| SEAT | Seat material | Moulded PU, PU foam |
| Density of PU used in seat (kg per cubic meter) | >40<=50 | |
| Thickness of PU used in seat (mm) | >30<=40, >40<=50 | |
| Minimum seat height from floor surface (mm) | >400<=500 | |
| Width of seat (mm) | >450 | |
| Depth of seat (mm) | >400<=450 | |
| Seat upholstery material | Mesh fabrics, Polyester fabric, Leatherette, Leatherette with spacer fabric, Leather, Caned, Moulded PU | |
| BACKREST | Backrest base frame material | Mild steel frame, Hot pressed plywood, Solid wood, Injection moulded plastic |
| Backrest material | Moulded PU, PU foam, Hot pressed plywood | |
| Density of PU used in backrest (kg per cubic meter) | >40<=50 | |
| Thickness of PU used in backrest (mm) | <=30, >30<=40, >40<=50, >50, NA | |
| Width of backrest (mm) | <=400, >400<=450, >450 | |
| Backrest height from the seat level | >450<=550 | |
| Backrest upholstery material | Mesh fabrics, Polyester fabric, Leatherette, Leatherette with spacer fabric, Leather, Caned, Moulded PU | |
| ARMREST | Armrest type | Moulded armrest continuously fitted with seat and back |
| Armrest movement | Adjustable, Fixed, Without armrests | |
| WARRANTY | Warranty period in number of years | 1, 2, 3, 4, 5 Or higher |
© 2025 GeM All rights reserved
Site operated and maintained by Managed Service Provider
New on GeM
