Catalogue values for Gas Chromatography
| Category | Specification | Bid Requirement (Allowed Values) |
|---|---|---|
| GAS CHROMATOGRAPH (GC) CONFIGURATION | "GC Detectors inclusive in the scope of supply (Select Only those Detectors, which are part of supply)" | Flame Ionization Detector (FID) |
| "Number of FID in the System - inclusive in the scope of Supply (Select '0' if this Detector is not a part of supply)" | 2 | |
| "Number of TCD in the System - inclusive in the scope of Supply (Select '0' if this Detector is not a part of supply)" | 0 | |
| "Number of ECD in the System - inclusive in the scope of Supply (Select '0' if this Detector is not a part of supply)" | 0 | |
| "Number of NPD/FTD in the System - inclusive in the scope of Supply (Select '0' if this Detector is not a part of supply)" | 0 | |
| "Number of FPD in the System - inclusive in the scope of Supply (Select '0' if this Detector is not a part of supply)" | 0 | |
| "Number of PID in the System - inclusive in the scope of Supply (Select '0' if this Detector is not a part of supply)" | 0 | |
| "Number of PFPD in the System - inclusive in the scope of Supply (Select '0' if this Detector is not a part of supply)" | 0 | |
| Number of Inlets GC can Simultaneously Support | 2 | |
| Number of Detectors (Ports) GC can Simultaneously Support | 2 | |
| Number of Capillary Columns provided in GC - inclusive in the scope of Supply | 1 | |
| Type of Capillary Column | Non-Polar | |
| "GC Capillary Column Length (Hint:-Select '0' if Not Applicable)" | 30.0 | |
| "Number of Packed Columns provided in GC - inclusive in the scope of Supply (Hint:-Select '0' if Not Applicable)" | 1 | |
| "GC Packed Column Length (Hint:-Select '0' if Not Applicable)" | 6.0 | |
| PERFORMANCE | "GC Detector Minimum Detection Level (MDL) " | < 1.4 pg C/s for FID |
| COLUMN OVEN (GAS CHROMATOGRAPH - GC) | Maximum Operating Temperature (GC Oven) | upto 450 deg. C (2) Or higher |
| Number of Oven Ramps / Plateaus for Temperature programming | 9/10 or more | |
| Temperature Ramp Rate - Maximum | 50 Deg. C/minute or better | |
| PNEUMATIC CONTROL | Number of Injection Ports | 2 |
| Maximum Injection Port heating Temperature | upto 400 deg. C (1), upto 450 deg. C (2) Or higher | |
| Pressure Range | upto100 psi (1), upto 120 psi (2) Or higher | |
| Pressure set point Resolution (±)(psi) | 0.001, 0.01, 0.1 Or lower | |
| Type of Sample Injection Port | split / Splitless | |
| Split Ratio | 7500:1 | |
| AUTO INJECTOR / AUTO SAMPLER | Compatible Liquid Auto Sampler - inclusive in the scope of supply | No |
| Capacity of the Liquid Auto Sampler (Number of Vials) | 0, 15, 100, 150 Or higher | |
| Number of Injection Ports in the Liquid Auto Sampler | 0 | |
| Number of Channels in the Liquid Auto Sampler | 0 | |
| Minimum Volume of the injected liquid sample | 0.0 | |
| Maximum Volume of the injected liquid sample | 0.0 | |
| "Liquid Auto Sampler Features (Select applicable features Only)" | NA | |
| HEAD SPACE SAMPLER | Compatible Head Space Sampler- inclusive in the scope of supply | No |
| Capacity of the Head Space Sampler Carousel (number of Vials) | NA | |
| Head Space Sampler Temperature Range | NA | |
| PYROLYZER SYSTEM | Compatible Pyrolyzer System for pyrolysis of solid and liquid samples- inclusive in the scope of supply | No |
| SALIENT FEATURES OF GAS CHROMATOGRAPH (GC) | "Salient Featutes of GC (Select applicable features Only)" | Controlled by External PC System |
| SOFTWARE | "Software Features (Select Applicable Features only)" | Chromatographic attributes |
| GENERIC | Display | Built-in Display |
| Connectivity interface | ETHERNET | |
| Provision to split the sample from single injection to two different detectors and get results for two detectors simultaneously | No | |
| ACESSORIES | Gas Supply inclusive in the scope of supply | Not offered |
| Capacity of Gas cylinder | Not offered | |
| Number of Cyliners of each type supplied - inclusive in the scope of supply | 0 | |
| Gas cylinders certified by PESO | No for Gas Cylinder Not Offered | |
| Regulator - inclusive in the scope of supply | NA | |
| "Other Accessories inclusive in the scope of supply (Select only those Accessories which are part of supply)" | Septa for injector x 100 nos | |
| ENVIRONMENTAL | Minimum Operating Temperature | 0.0 - 10.0 Or lower |
| Maximum Operating Temperature | 40.0 - 65.0 Or higher | |
| Operating Humidity (RH) (%) at 40 degree C | 95.0 - 95.0 Or higher | |
| INSTALLATION & COMMISSIONING / WARRANTY / AVAILABILITY OF SPARES / TRAINING | Warranty on equipment | 1.0 |
| Number of days onsite training provided | 3.0 | |
| CERTIFICATION / TEST REPORT | "Availability of UL/CE Certificate as per IEC 61010- 1 latest - Safety requirements for electrical equipment for measurement,control, and laboratory use General requirements" | Yes |
| Conformance to EMC/EMI as per IEC 61326-1 latest - Electrical equipment for measurement, control and laboratory use | No | |
| Availability of Test Reports from Central Govt / NABL approved / ILAC accredited Lab to prove conformity to the specification | No | |
© 2025 GeM All rights reserved
Site operated and maintained by Managed Service Provider
New on GeM
