Catalogue values for High Mast Lighting Octagonal Tower for Small area with LED Flood Lighting System (V2)
| Category | Specification | Bid Requirement (Allowed Values) |
|---|---|---|
| GENERIC | Installation, testing and demonstration((Installation, testing and demonstration work at multiple locations shall follow as per the guidelines of State/Central Govt rules and regulations as applicable) | |
| No of LED Luminaires can be fitted in the carriage of each octagonal pole (in Nos) | ||
| Lantern carriage Diameter | ||
| Onsite warranty (in years) | ||
| Height of Octagonal pole (in m) | ||
| Octagonal Pole Construction | Octagonal pole sheet thickness | |
| Internal distance between parallel faces at the base of pole | ||
| No. of stiffners per pole | ||
| Internal distance between parallel faces at the top of pole | ||
| Grades of High Tensile Steel | ||
| Door Opening | Height of Door opening from base plate | |
| Type of Locking arrangement for door | ||
| Size of Opening door from base compartment with gasket | ||
| Base Plate | Width of Base Plate | |
| Number of Nuts for each pole | ||
| Bolts and Nuts are conforming to specification | ||
| Bolt Size | ||
| Thickness of Base Plate | ||
| Number of washer per bolt for each pole | ||
| Number of Bolts for each pole | ||
| Length of Base Plate | ||
| Wind Load | Regional wind withstand capacity which the pole structure support is suitable to withstand (in m/s) | |
| Junction Box | Terminal Box with Circuit breakers and backlite sheet for cable termination at door opening (Base compartment) for each pole | |
| Astronomical automatic street light timer switch | ||
| Material of Junction Box | ||
| Ingress protection class of Junction Box(As per IS/IEC60529:2001 latest) | ||
| Phase of Astronomical automatic street light timer switch | ||
| Electrical System, Cable and Cable connector | Number of Cores | |
| Conductor material of cable | ||
| Size of Cable(in sq mm) | ||
| Cable shall be | ||
| LED Flood Light Luminaire | LED Rating/System Wattage/Rated Power (in Watts) | |
| Colour temperature (+/-500K) | ||
| Input operating Voltage range and frequency | ||
| Number of electronic control gear per luminaire (power supplies) (in Numbers) | ||
| Operating Humidity Range | ||
| Manufactures Name and and brand on the aluminium die cast body | ||
| The luminaire shall be protected against surges and transients ( Internal) | ||
| Operating temperature range(degree celsius) | ||
| LED Make | ||
| The entire housing (both LED section and driver section) shall be dust and water proof protection as per IS:10322 (Part 1):1982 latest | ||
© 2025 GeM All rights reserved
Site operated and maintained by Managed Service Provider
New on GeM
