Catalogue values for Drinking Water ATM / Water Vending Machine (Version 2)
| Category | Specification | Bid Requirement (Allowed Values) |
|---|---|---|
| Coin / Card Acceptor / Quantity of Dispensing Water | Number of Dispensing points | 3, 4, 5, 6 Or higher |
| Water Dispensing using coin acceptor | Yes | |
| Coins accepted for payment | Re.1, Rs. 2, Rs. 5, Rs.10 | |
| Water Dispensing using RFID/NFC card | No | |
| Mobile Wallet accepted for payment | Yes | |
| CAPACITY / TYPE / WATER SOURCE / OUTLET WATER QUALITY | Purification Capacity of Water ATM (LPH) | 200, 250, 300, 500, 1000, 2000 Or higher |
| Type of Operation | Automatic with Multi-Processor Integrated Control System and remotely conrolled web based Server system Or higher | |
| Water Source | Surface Water | |
| TECHNOLOGY | Technology | Reverse Osmosis (RO) |
| Anti scalant dosing pump | No | |
| pH Correction Dosing Pump | No | |
| CONSTRUCTIONAL | Raw water Storage capacity (Indicate '0' for direct connection to continuous Tap Water source) | 200, 500, 1000, 2000, 3000, 5000, 8000, 10000 Or higher |
| Raw water Storage Tank Material of Construction | HDPE | |
| Location of the Raw Water Storage Tank | Inside the ATM Enclosure | |
| Treated water Storage capacity | 201-250, 251-300, 301-350, 351-400, 401-500, 501-600, 601-700, 701-800, 801-1000 Or higher | |
| Treated water Storage Tank Material of Construction | Stainless Steel 316 Gr, Stainless Steel 304 Gr, HDPE Or higher | |
| Equipped with an in-built chiller unit for providing continuous cold water of temperature around 15 degree Celcius | Yes | |
| In-built Chiller Tank Capacity (Liter) | 21-50, 51-100, 101-150, 151-200, 201-250, 251-300, 301-350, 351-400, 401-500, 501-600, 601-700, 701-800, 801-1000 Or higher | |
| Chiller Tank Material of Construction | Stainless Steel 316 Gr, Stainless Steel 304 Gr Or higher | |
| Number of Filtration steps | 5 | |
| Provided with suitable vending place for filling container of 20 liters capacity | No | |
| DISPLAY | Display of water purity parameters | Yes, No |
| Display Type | LED, LCD, TFT, NA Or higher | |
| Backlit Display | Yes, No | |
| Touch Screen Display | Yes, No | |
| Display Size (Characters x Lines) | 4 x 2 (4 Ch x 2 lines), 8 x 2 (8 Ch x 2 lines), 16 x 2 (16 Ch x 2 lines), 20 x 2 (20 Ch x 2 lines), 7" Tablet, NA | |
| Display of oulet water TDS level | Yes, No | |
| Display of outlet water pH level | Yes, No | |
| Display of outlet water Temperature | Yes, No | |
| Inlet / Feed Pump to feed water from raw water storage tank to filter | Inlet / Feed Pump Type | Horizontal Centrifugal |
| Number of Inlet / Feed Pumps | 1 | |
| Multi Media Filter Vessels for First stage filtration for suspended particles | Material Of Construction for Multi Media Filter Vessels | FRP, Steel Or higher |
| Number of Multi Media Filter Vessels | 2, 1 Or higher | |
| Multi-Port Valve to control filtration and backwash for media filter having sand & carbon | Type of Multi-Port Valve | Automatic |
| Multi-Port Valve Material of Construction | ABS | |
| Number of Multi-Port Valves | 2 | |
| Anti scalent Dosing Pump to inhibit scaling of hardness salt and silica on RO Membranes, doze pH and Cl as per water quality | Type of Anti scalent Dosing Pump | NA |
| Material Of Construction for Anti scalent Dosing Pump | NA | |
| Number of Anti scalent Dosing Pumps | NA | |
| pH Correction Dosing Pump & Dosing Tank to dilute water with dosing chemicals | Type of pH Correction Pump | NA |
| Material Of Construction for pH Correction Dosing Pump | NA | |
| Number of pH Correction Dosing Pumps | NA | |
| Dosing Tank Material of Construction | NA | |
| High Pressure Pump to develop required pressure for Reverse Osmosis on RO Membranes | Type of High Pressure Pump | NA |
| Material Of Construction for High Pressure Pump | NA | |
| Number of High Pressure Pumps | NA Or higher | |
| Low pressure switch for Protection of HP pump from burn-out | NA | |
| RO Pressure Vessel | Type of RO Pressure Vessel | Membrane housing mounted on skid - End port type |
| Material Of Construction for RO Pressure Vessel | FRP | |
| Number of RO Pressure Vessels | 4 Or higher | |
| Ultra Violet (UV) System to disinfect water, kill bacteria and micro-organisms | Material Of Construction for UV System | SS |
| Number of UV Systems | 1, 2 Or higher | |
| Number of UV Lights | 1, 2, 3, 4, 5, 6 Or higher | |
| Total UV Power | 16 Watts | |
| CIP (Clean-In-Place)Tank to mix / Dilute chemicals for membrane cleaning and permeate back wash | CIP Tank | No |
| CIP Tank Material of Construction | NA | |
| Number of CIP Tanks | NA Or higher | |
| Power Source | Power Source | AC & DC (for dispensing only) Power Supply |
| Power Supply | 230 ±10 V AC | |
| Battery back-up time (Hours) | 6, 8, 10, 12, 14, 16, 18, 20, 22, 24 Or higher | |
| Water ATM - Enclosure | Structure | Rigid structure made of SS frame(3), Or higher |
| Thickness of the frame of structure (mm) | 2.5, 2 Or higher | |
| Material of Construction of Side Panels of Water ATM | Stainless Steel Sheet Or higher | |
| Side Panel Sheet Thickness (mm) | 1, 1.2 Or higher | |
| PUF insulation of Side Panels of Water ATM | With, Without Or higher | |
| PUF insulation of the door of Water ATM | With, Without Or higher | |
| Provision for in-built litter space | Yes | |
| Covered area of treatment plant enclosure (Square Foot) | 5.1-10, 10.1-15, 15.1-20, 20.1-30, 30.1-40, 40.1-50, 50.1-60, 60.1-70, 70.1-80, 80.1-90, 90.1-100, 100.1-110, 110.1-120 Or higher | |
| Shape of the Water ATM housing | Cuboidal | |
| Top Canopy of the Water ATM housing | Sloped | |
| Headroom for the Water ATM enclosure (Foot) | 7.1-8.0, 8.1-9.0, 9.1-10.0 Or higher | |
| Floor area around the Water ATM enclosure covered with anti-skid tiles | Yes | |
| Water ATM enclosure protected with enclosed MS grill / mesh | No | |
| Installation & Commissioning / Warranty | Trial Run and Training provided (inclusive in the Scope of Supply) (Days) | 5, 10 Or higher |
| Warranty for storage Tanks (Year) | 3, 4, 5 Or higher | |
| Warranty for electrical motors (Year) | 1, 2, 3 Or higher | |
| Warranty for the filters (Year) | 1, 2, 3 Or higher | |
| Warranty for the system (Year) | 1, 2, 3 Or higher | |
| Test Reports | Availability of Test Report from Central Govt /NABL/ILAC accredited lab to prove confirmity to specification | No |
| All the test reports and certificates shall furnish by the supplier to the buyer/consignee on demand | Yes | |
© 2025 GeM All rights reserved
Site operated and maintained by Managed Service Provider
New on GeM
