Catalogue values for Chest Press - Outdoor Gym Equipments
| Category | Specification | Bid Requirement (Allowed Values) |
|---|---|---|
| TYPE | Type | Chest Press Single |
| CAPACITY | Maximum User Weight ( Kg ) | 110.0 |
| MATERIAL | Governing Specification for GI Pipes | BIS specification No IS 1239 ( Part 1 )- 2004, latest |
| All the GI Pipes are ISI marked | Yes | |
| Main Central Pipe | 150mm Nominal Bore G.I. Pipe | |
| Main Central Pipe, Class as per IS 1239 | Heavy | |
| Handle Frame | 40mm Nominal bore G.I. pipe | |
| Handle Frame Pipe, Class as per IS 1239 | Heavy | |
| Seat Frame | 32mm Nominal Bore G.I. Pipe | |
| Seat Frame Pipe, Class as per IS 1239 | Medium | |
| Connecting Links | 12mm thick MS plates | |
| Connecting Links Pipe, Class as per IS 1239 | Not applicable for M.S. Plates and Pipes as per IS 1161 | |
| Foot Rest Pipe | 32mm Nominal Bore G.I. Pipe | |
| Foot Rest Pipe, Class as per IS 1239 | Medium | |
| MS Foundation Plate Thickness | 12.0 | |
| Foundation Pipes with anchoring | 500mm deep GI Pipe, supported with M.S. Angle 25 X 25 X 4mm | |
| Nominal Bore of Foundation Pipe | 100mm | |
| Foundation Pipe, Class as per IS 1239 | Medium | |
| Seat and Back Rest | 3mm thick, HDPE with uniform bending radius to avoid sharp edges | |
| Bearings | Tapered Roller Bearing | |
| OTHER REQUIREMENTS | Installation | Not Included |
| CERTIFICATION | Certfication ( Safety and Quality Requirements ) | As per European Standard EN 16630 |
| WARRANTY | Warranty ( years ) | 2.0 |
© 2025 GeM All rights reserved
Site operated and maintained by Managed Service Provider
New on GeM
