Catalogue values for Laparoscopic Surgery System (V2)
Category | Specification | Bid Requirement (Allowed Values) |
---|---|---|
GENERAL | Product Description | Laparoscopic Surgery System |
Components of the laparoscopic set to be from the same OEM | Camera head, Camera console, Light source and cable, Telescope | |
CAMERA PROCESSOR | Camera processor | 2D, 3D |
Resolution of camera in pixels | 1920 x 1080 (Full HD), 3840 x 2160 (4K) | |
Aspect ratio | 16:9 | |
Image sensor | CMOS/CCD | |
Progressive scanning system for camera | Yes | |
Special filters for chrome endoscopy | Yes Or higher | |
Minimum Video output | 2 | |
Minimum Number of programmable buttons on camera head | 3 | |
Zoom facility | Yes | |
The system capable of lCG fluoroscopy for better delineation of anatomic structures | Yes Or higher | |
The camera head shall be sterilizable by autoclave or by some other appropriate technology | Yes | |
Camera shall have excellent performance under low light | Yes | |
Availability of USB Port to capture data | Still Images | |
Provision to add fiberoptic filter | Yes | |
Should be compatible with flexible video endoscope | Yes | |
Power supply | 100-240V, 50/60 Hz Single phase | |
HIGH-RESOLUTION MEDICAL GRADE MONITOR | Monitor type | 2D, 3D |
Size of monitor in inches | 31 to 40 | |
Resolution of monitor in pixels | 1920 x 1080 (Full HD), 3840 x 2160 (4K) | |
Aspect ratio of monitor | 16:9 | |
Display monitor | LED/Backlit LED | |
Panel shall be anti glare | Yes | |
Monitor shall have picture in picture facility | Yes | |
Provision of cooling | Yes | |
Provision of monitor stand with integrated cable channel for monitor | Yes | |
Minimum Video inputs | 2 | |
Minimum Video output of monitor | 2 | |
Viewing angle of monitor | 178 degree (H) and 178 degree (V) | |
Availability of output ports | Digital | |
Power Supply | 100 - 240 VAC 50/60 Hz | |
Monitor is from the same OEM make | Yes | |
LIGHT SOURCE | Light Source Type | LED Lamp |
Lamp life | 10000 hours or more, 20000 hours or more Or higher | |
CO2 INSUFFLATOR | CO2 insufflator provided | Yes |
Flow rate in Litre per minute | 40 or more | |
Pressure in mm Hg | 0 to 30 mmHg | |
Pre heating facility | Yes | |
Digital Display for actual and pre set flow rate and pressure and total volume consumed | Yes | |
Provision of automatic venting mechanism | Yes | |
Provision of patient tube with luer lock adaptor | Yes | |
CO2 insufflator should have visual and audible alarms | Yes | |
CO2 Insufflator should be from same OEM make | Yes | |
TELESCOPES | Telescope provided | Yes |
Compatibility of telescope | 4K | |
NIR/ICG compatible | Yes | |
Quantity of 4mm telescope (30 degree each) | 1, NA if not provided | |
Quantity of 5-6 mm telescope (0 degree each) | 1 | |
Quantity of 5-6 mm telescope (30 degree each) | 1 | |
Length of telescope in cm | 29 to 33 cm (Non Bariatic) | |
Telescope shall be autoclavable | Yes | |
Material of telescope | Medical grade stainless steel | |
DOCUMENTATION SYSTEM (RECORDER SYSTEM) | The system is compact and provided with medical grade recording device | Yes |
Type of recording system | 2D, 3D | |
Provision for digital storage of still images, video sequences, and audio files Format available | 4K | |
Provision of Portable memory and USB slot for still image recording available | Yes | |
Minimum internal memory | 1 TB, 2TB Or higher | |
Live streaming facility | Yes | |
MOBILE VIDEOCART | Availability of locking brakes | Yes |
Number of shelves | 4 | |
Cable channel mounted on the left or right of the column | Yes | |
ACCESSORIES | Online UPS 2 KVA | Yes |
CERTIFICATIONS | Conformity to standards for safety | IEC/EN 60601-1 or equivalent BIS Standard |
Submission of all necessary certifications, licenses and test reports to the buyer at the time of bid submission or along with supplies as per buyer requirement | Yes | |
WARRANTY | Warranty in Years (Option of comprehensive warranty is available through bidding only, which if opted will supersede normal warranty in the catalogue) | 2, 3, 5 Or higher |
MISCELLANEOUS REQUIREMENTS | OEM/Reseller shall ensure uninterrupted availability of all spares, consumables for atleast 10 years | Yes |
Availability of toll free facility for technical support maintened by OEM or authorized agencies | Yes | |
User/Technical/Maintenance manuals to be provided in English in hard and soft copy | Yes | |
Details of equipments and procedures required for local calibration and routine maintenance to be provided and advanced maintenance task documentation also to be furnished | Yes | |
Supplier to perform installation, safety and operation checks before handover | Yes | |
Contact details of manufacturer, supplier and local service agent to be provided | Yes | |
Certificate of calibration from the manufacturer | Yes | |