Catalogue values for SPECTROPHOTOMETER
| Category | Specification | Bid Requirement (Allowed Values) |
|---|---|---|
| LIGHT SOURCE | Light Source | Xenon Flash |
| Diffraction Grating (lines/mm) | 1000 | |
| Switching of Light Source | Automatic | |
| Wavelength Setting And Scanning | Automatic | |
| TYPE | Type of Spectrophotometer | UV - VISIBLE |
| Type of Optical System | Single Beam | |
| Monochromator Type | Czerny-turner | |
| Detector Type | CMOS | |
| Spectral Bandwidth Type | Fixed Bandwidth | |
| OPTICAL PERFORMANCE | Source Wavelength - Minimum | 200.0 |
| Source Wavelength - Maximum | 320, 340, 760, 780, 900, 960, 1000, 1100, 1500, 2000, 2500, 2700, 3000, 3200, 3300, 1650, 644 Or higher | |
| Resolution | 1.0 | |
| Wavelength Accuracy (+/-) | 1.0 | |
| Bandwidth (nm) | 1 | |
| Focal length (mm) | 200 to 249 | |
| Photometric measurement modes | Concentration (Wavelength, time) | |
| Photometric Absorbance (Max) (Abs) (+/-) | 8 | |
| Photometric Absorbance Accuracy (Max) (+/-) | 0.001 - 0.03 Or lower | |
| Photometric Transmittance (Max) (+/-) | 100.0 | |
| Photometric Transmittance Accuracy (Max) (+/-) | 0.0 - 0.5 Or lower | |
| Photometric Reflectance (Max) (+/-) | 0.0 | |
| GENERIC | Display | In-built display |
| Display type | TFT | |
| Display Size | 7.0 - 30.0 Or higher | |
| Test result printing | Through external printer | |
| If inbuilt printer, Type of printer | N/A | |
| Internal storage(GB) | 80.0 - 80.0 Or higher | |
| Mximum Path Length of sample | 0.2 | |
| Number of Cuvettes supplied-inclusive in the scope of supply | 0 | |
| Spares and Consumables inclusive in the scope of supply | No | |
| OPERATING CONDITIONS | Minimum Operating Temperature | 5.0 |
| Maximum Operating Temperature | 50.0 | |
| Operating Humidity (RH) (%) at 40 degree C | 85.0 | |
| WARRANTY | Onsite Warranty | 5.0 |
| Availability of Spares (at extra cost) | 7.0 | |
| Certification | Availability of UL/CE Certification as per EN 61010-1:2010 Safety requirements for electrical equipment for measurement, control, and laboratory use General requirements | No |
| Conformance to EMC/EMI as per EN 61326-1:2013 Electrical equipment for measurement, control and laboratory use | No | |
| Availability of Test Reports from Central Govt / NABL approved / ILAC acredited lab to prove conformity to the specification | No | |
© 2025 GeM All rights reserved
Site operated and maintained by Managed Service Provider
New on GeM
