Catalogue values for LED Luminaire (for Flood Light) as per IS 10322, IS 16107

Category Specification Bid Requirement (Allowed Values)
STANDARDS LED Luminaire conformity to IS:10322/Part 5/Section 5/2012 latest and IS: 16107 (Part 2/Sec 1):2012 latest Yes
LED Rating/System Wattage/Rated Power 400W
Ingress Protection (IP Rating) as per IS:10322 (Part 1):1982 latest IP66
Warranty for free replacement (in Years) 5
ELECTRICAL EFFICIENCY Input operating Voltage range and frequency 140 to 270 V olts AC at 50 Hz+/-2 Hz with auto cutt off at below 120V
Rated voltage 230 V AC 50 Hz
Total Harmonics Distortion (in %age) ≤ 10
OPTICAL Colour temperature (+/-500K) 6000K
Working life for LED (Minimum 50,000 burning hours as per LM-80 report) Yes
Colour Rendering Index(CRI) ≥70
Optic lense materal (UV stabilised) (Write NA for without optic lense supply) Poly carbonate lense
THERMAL MANAGEMENT Heat sink should be die-cast aluminium along with sufficient heat sink fins to dissipate heat effectively Yes
Junction temperature < 85 degC
Operating temperature range -10 deg C to +55 deg C
PROTECTION The luminaire shall be protected against surges and transients ( Internal) >/=5KV
The luminaire shall be protected against surges and transients of >/=10KV (External) Yes
CONSTRUCTIONAL The Luminaires casing/housing (single piece housing) shall be pressure die casted aluminium alloy with higher thermal conductivity Yes
Number of electronic control gear (power supplies) 1 No.
Suitable connector shall be provided for LED connection between driver output and LED Yes
Length of ISI marked three core wire (shall be provided along with supply of material) 50 cm
REPORTS AND CERTIFICATIONS LED Make OSRAM / NICHIA/CREE / SAMSUNG / SEOUL / LUMILED / PHILIPS / EDISON / SYSKA / LUMENMAX / EVERLIGHT / BRIDGELUX / NATIONSTAR / REFOND