Catalogue values for Card Room Chair
| Category | Specification | Bid Requirement (Allowed Values) |
|---|---|---|
| GENERIC | Type of chair | Fixed, Folding legs, With gas tilt and swivel mechanism |
| Type of seat and backrest | Seat and Back rest permanently fixed with the frame structure, Seat and Backrest are removable, Only seat is removable | |
| Frame covering | Fully upholstered, Partially upholstered, Fully exposed | |
| Frame type | cantilever, 4 - Legs | |
| SEAT | Shape of seat | Round, Rectangular, Oval, Square |
| Material of seat | Hot pressed ply wood, Flat single layer MDF board of grade SBG II of IS 12406/Latest, Three layer prelaminated particles board (Wood product) of grade II type II of IS 12823/Latest, Commercial Block Board BWP grade Conforming to IS 1659, Decorative Block Board BWP grade Conforming to IS 1659, Commercial Block Board MR Grade Conforming to IS 1659, Decorative Block Board MR Grade Conforming to IS 1659, Teak wood, Carved Teak wood, Other wood, Thick padded seats with spindles | |
| Seat frame material | MS, CRCA ERW round pipe, ERW pipe, CRCA pipe with wooden seat, Stainless steel SS 202, Stainless steel SS 304, Chrome on MS, Teak wood, Carved Teak wood, Other wood | |
| Upholstery of seat | PU foam covered with polypropylene cover, PU foam covered with mesh fabric, PU foam covered with fabric, PU foam covered with Genuine Leather, PU foam covered with leatherite, No cover/Upholstery | |
| Thickness of seat material +/- 2 mm | 12, 15, 19, 25, 32, 36, 39 | |
| Seat width ±10mm | 380, 400, 425, 450, 475, 500, 525, 550 | |
| Seat depth ±10mm | 380, 400, 425, 450, 500, 525, 550, 570, 475 | |
| Seat height ±10mm | 400, 425, 450, 475, 500 | |
| BACKREST | Design of backrest | With three numbers vertical support, With four numbers vertical support, With five numbers vertical support, With one number horizontal support above arm, With two numbers horizontal support, With three numbers horizontal support, Full size backrest, Thick padded backrest with spindles |
| Material of backrest | Hot pressed ply wood, Flat single layer MDF board of grade SBG II of IS 12406/Latest, Three layer prelaminated particles board (Wood product) of grade II type II of IS 12823/Latest, Commercial Block Board BWP grade Conforming to IS 1659, Decorative Block Board BWP grade Conforming to IS 1659, Commercial Block Board MR Grade Conforming to IS 1659, Decorative Block Board MR Grade Conforming to IS 1659, Teak wood, Carved Teak wood, Other wood, Thick padded seats with spindles | |
| Backrest frame material | MS, CRCA ERW round pipe, ERW pipe, CRCA pipe with wooden seat, Stainless steel SS 202, Stainless steel SS 304, Chrome on MS, Teak wood, Teak carved wood, Other wood | |
| Thickness of back rest material ±2mm | 9, 12, 15, 19, 25, 32, 26, 40 | |
| LEG | Material of leg | Teak wood, Teak carved wood, Other wood, MS, CRCA ERW round pipe, Stainless steel SS 202, Stainless steel SS 304, Chrome on MS |
| MISC | Covering material for seat and backrest | Fabric, Rexin, Leather fabric / leatherite, Genuine leather |
| WARRANTY | Warranty period in number of years | 1, 2, 3 Or higher |
| CERTIFICATION | OEM of offered product is ISO 9001:2015 certified | YES, NO |
| OEM of offered product is ISO 14001:2015 certified | YES, NO | |
| OEM of offered product is ISO 18001:2007 certified | YES, NO | |
© 2025 GeM All rights reserved
Site operated and maintained by Managed Service Provider
New on GeM
