Catalogue values for Rigid GI Pipe (BHEL)
| Category | Specification | Bid Requirement (Allowed Values) |
|---|---|---|
| Technical Specifications | GI Bend Type | External Thread |
| Pipe Size (With Ecterbal Thread To Both Ends) | 50 NB, 100 NB, 150 NB, 200 NB, 300 NB | |
| Standard Length of Pipe | 5 Meter, 6 Meter | |
| 90 Degree GI Pipe Bend Suitable For Pipe Size | 50 NB, 100 NB, 150 NB, 200 NB, 300 NB | |
| Galvanisation Thickness (Minimum) | 65 micron, 70 micron, 75 micron, 80 micron, 86 micron, More than 86 micron | |
| Material | G.I. | |
| Thickness Of Pipe As Per Schedule 40 (mm) | 3.91, 6.02, 7.11, 8.18, 10.31 | |
| GI Pipe Socket Suitable For Pipe Size | 50 NB, 100 NB, 150 NB, 200 NB, 300 NB | |
| Technical Specifications and Requirement of the Product | As per BHEL Spec (Attached) | |
| GI Socket Type | Internal Thread | |
| Standards | Applicable Standards | IEC: 61537 : Cable tray systems and cable ladder systems for cable management, IS2062/2011 (Reaffirmed 2016) : Steel for general structural purpose, IS2633/1986 (Reaffirmed 2016) : Method for testing uniformity of coating on Zinc coated articles, IS2629/1985 (Reaffirmed 2016): Recommended practice for hot dip galvanising on iron & steel, IS4759/1996 (Reaffirmed 2016): Hot dip Zinc coating on structural steel and other allied products, IS6745/1972 (Reaffirmed 2016) : Method for determination of mass of zinc coating on zinc coated iron and steel articles, IS808/1989 (Reaffirmed 2014) : Rolled steel beams, channel and angles, IS1852/1985 (Reaffirmed 2017): Rolling and Cutting tolerances for rolled steel products, IS2074 Part-1, 2015): Recommended practice for red oxide And zinc chromate on iron & steel, ASTM-A123, A153 : Support Structure, ASTM-A5/A 53M-20:Pipe, steel hot dip zinc coated welded & seamless, IS 1730:1989 (Reaffirmed 2014): MS Flats, IS 1367 Part-11/2002 (Reaffirmed 2018) : Electroplating coating on threaded parts |
© 2025 GeM All rights reserved
Site operated and maintained by Managed Service Provider
New on GeM
