GeM | Bidding

Category	Specification	Bid Requirement (Allowed Values)
Material	Governing Specification for GI Pipes	BIS specification No IS 1161:2014, latest
All the GI Pipes are ISI marked	Yes
Vertical / Standing Pipes	100 mm Nominal Bore G.I. Pipe
Vertical/ Standing Pipes, Class as per IS 1239	Heavy
Vertical / StandingPipe (as per Clause 3 of IS 1161) , Nominal Bore & Wall Thickness	100 mm NB with 3.6 mm Thickness
Horizontal Pipe	32 mm Nominal Bore G.I. Pipe
Horizontal Pipe, Class as per IS 1239	Heavy
Horizontal Pipe ( As per Clause 3, of IS 1161 ) Nominal Bore & Wall Thickness	32 mm NB with 2.6 mm Thickness
Grade Material as per table 2 of IS 1161	Not Applicable
Foundation Pipes with anchoring	750mm deep GI Pipe, supported with M.S. Angle 25 X 25 X 4mm
Nominal Bore of Foundation Pipe	100 mm
Foundation Pipe, Class as per IS 1239	Heavy
Foundation Pipe Pipe ( as per IS 1161 ) as per clause 3, Nominal Wall & Thickness	32 mm NB with 3.2 mm Thickness
M S Foundation Plate Thickness	12.0
Bearings	Tapered Roller Bearing
Foot Rest	Fibre Reinforced Plastic
Other Requirements	Installation	Included
Certification	Certfication ( Safety and Quality Requirements )	As per European Standard EN 16630
Warranty	Warranty ( years )	2.0

Category

Specification

Bid Requirement (Allowed Values)

Material

Governing Specification for GI Pipes

BIS specification No IS 1161:2014, latest

All the GI Pipes are ISI marked

Yes

Vertical / Standing Pipes

100 mm Nominal Bore G.I. Pipe

Vertical/ Standing Pipes, Class as per IS 1239

Heavy